Lok-U-Plug

For added safety, ATEN offer cable holders and installation tools to ensure a high level of safety when using NRGence eco PDU / Energy PDU devices in your server room. Simply secure the cable holders using the specially designed holes around the individual power outlets. With their patented design,
ATEN Lok-U-Plug cable holders provide convenience and safety for your PDU installation.

line

2X-EA07
Lok-U-Plug Cable Holder ( 10 pcs per pack )   Patent Pending!
 

2X-EA08
Lok-U-Plug Installation Tool ( 4 pcs per pack )
 
line
 Features
 
  • Enhances the safety of a PDU installation
  • Easy installation
  • Reduces the damage caused by accidentally unplugging power cords
  • Compatible with all NRGence eco PDUs and Energy PDUs


line
 
 Installation Instructions
 
 
 
Step 1
Bend the Lok-U-Plug cable holder as shown in the diagram.
 
 
 
Step 2
Put the power cord through the middle of the Lok-U-Plug cable holder.
 
Step 3
  • Plug the power cord into the power outlet.
  • Thread one end of the Lok-U-Plug into the lower left hole of the power outlet.
 
 
 
SStep 4
Use the Lok-U-Plug Installation Tool to secure the cable holder, pushing down so the small part of the chain locks into the small part of the hole.
 
Step 5
  • Push the cable holder as close as possible to the PDU and thread the other end of the chain to the upper right hole.
  • Use the Lok-U-Plug Installation Tool to secure the cable holder, pushing down so the small part of the chain locks into the small part of the hole.
 
 
 
Step 6
Push the right and left rings to the middle, ensuring that the power cord is completely fastened, to complete the installation.
 
Suggested installation sequence
  • Plug in all the Lok-U-Plugs to the PDU, but only secure to the lower holes.
  • When you are done with the lower left holes, then secure the upper right holes.