Where to buy | Partner Portal | eShop

20A 24-Outlet eco PDU (Thin Form Factor eco PDU)


PE5224TA
  • Bank level power metering and monitoring
  • Thin form factor design with 56 mm width
  • Supports TCP/IP, UDP, HTTP, HTTPS, SSL, DHCP, SMTP, NTP, DNS, Auto Sense, Ping, Telnet, and SNMP V1,V2&V3
  • Lok-U-Plug and EZ-Lok Holders – easily secures power cables to the PDU
MSRP: Quote Upon Request

The ATEN NRGence™ PE5224TA eco PDUs are thin form factor intelligent PDUs that contain 24 AC outlets available in IEC or NEMA socket configurations. The lightweight thin form factor eco PDUs have a smaller width and input region than ATEN’s standard and low profile PDUs. The thin form factor series have a 56 mm width that fits tight into server racks providing more space for cooling and maintenance. The smaller design leaves 8% more space in the rack to increase air flow and cool IT equipment more effectively. It also means faster maintenance with easier access to equipment normally installed behind the PDU.

NRGence™ eco PDUs offer real-time power measurement and threshold alerts – allowing you to monitor the PDU’s power status, bank status and circuit breakers, either at the PDU or from any location via a TCP/IP connection.

With the combination of ATEN eco PDUs and eco DC Energy Management Web GUI, a data center is equipped with real-time monitoring, measurement and analysis of energy consumption – with reports of power usage and PUE to meet the ISO 50001 requirements. These indexes will automatically generate customized reports about your data center’s energy use and include energy saving suggestions. The suggestions allow you to optimize energy usage and save money without harming your IT equipment’s reliability. eco DC Energy Management Web GUI provides easy multi-PDU management with an intuitive user-friendly interface that allows you to configure PDUs and monitor the power status of equipment connected to them.

Package Contents

  • 1x PE5224TA eco PDU
  • 1x Power Cord
  • 1x Mounting Kits
  • 1x User Instructions
  • Thin form factor design with 56 mm width
  • Built-in 10/100 Mbps Ethernet port
  • Supports TCP/IP, UDP, HTTP, HTTPS, SSL, DHCP, SMTP, NTP, DNS, Auto Sense, Ping, Telnet, and SNMP V1,V2&V3
  • 2-level account and password security
  • IP/MAC filters, SSL 128-bit data encryption and RADIUS for remote authentication
  • Supports eco DC Energy Management Software
  • Browser access via IE, Firefox, Chrome, Safari and more
  • Bank level power metering and monitoring
  • Environment monitoring via external sensors for rack temperature and humidity readings with threshold alerts
  • Real-time aggregate current, voltage, power, and aggregate power dissipation displayed in a browser-based UI
  • Space saving 0U rack mount design with rear mounting
  • Lok-U-Plug and EZ-Lok Holders – easily secures power cables to the PDU

    eco DC Energy Management Software*
  • Automatic discovery of all ATEN PDUs within the same intranet
  • Remote real-time power measurement and monitoring of PDUs
  • Real-time environment monitoring via sensors
  • Plotting and monitoring of all ATEN PDU devices
  • Exceed threshold alerts through real-time monitoring, SMTP and System log
  • Power analysis reports
    * eco DC is designed to work with NRGence™ eco PDUs, and is bundled with all PE series packages.
Electrical
Nominal Input Voltage100 – 120 VAC
Maximum Input Current20A(Max)
Input Frequency50-60 Hz
Input ConnectionNEMA 5-20P
Input Power2400 VA(Max)
Outlet TypeTotal: 24 x NEMA 5-20R
Bank1-1: Outlet 1 – 12; 12 x NEMA 5-20R
Bank1-2: Outlet 13 – 24; 12 x NEMA 5-20R
Nominal Output Voltage100 – 120 VAC
Maximum Output Current (Outlet)NEMA 5-20R: 20A(Max)
Maximum Output Current (Bank)20A(Max)
Maximum Output Current (Total)20A(Max)
MeteringBank Level Current, Voltage, VA , PF and kWh Monitoring
Outlet SwitchingNone
Environment Sensor Ports2
Metering AccuracyVoltage Range: 100VAC ~ 250VAC +/-1%
Power Range: 100W ~ Maximum Capacity +/- 2%
Current Range: 0.1A~1A +/- 0.1A, 1A~20A +/-1%
Physical Properties
Dimensions (L x W x H)177.50 x 5.60 x 4.80 cm
(69.88 x 2.2 x 1.89 in.)
Weight3.93 kg ( 8.66 lb )
Power Cord Length3 m
Environmental
Temperature (Operating / Storage)0–50°C / -20–60°C
Humidity (Operating & Storage)0–80% RH, Non-Condensing
Compliance
EMC VerificationFCC, J55022, Others by Request
Safety VerificationPSE, Others by Request
NoteFor some of rack mount products, please note that the standard physical dimensions of WxDxH are expressed using a LxWxH format.





DescriptionVer.Release DateFile Name
Firmware Upgradev1.2.1182022-11-21 pet_5_6_v1.2.118.zip
Firmware Upgradev1.2.1152020-04-10 pet_5_6_v1.2.115.zip
Firmware Upgradev1.2.1122018-04-10 pet_5_6_v1.2.112.zip
Firmware Upgradev1.2.1112017-07-11 pet_5_6_v1.2.111.zip
Firmware Upgradev1.1.1092016-12-14 pet_5_6_v1.1.109.zip
Firmware Upgradev1.1.1042016-09-06 pet_5_6_v1.1.104.zip
Firmware Upgradev1.1.1032016-06-03 PE5221T_PE5224TA_v1.1.103.zip
ОSDescriptionVer.Release DateFile Name
MIB File
MIB Filev1.1.1152015-05-05 PE_MIB_File_v1.1.115.zip
We are here to help! Please visit ATEN eService for technical assistance.