Photo Door Sensor
EA1440
- The Photo Door Sensor allows the monitoring of a rack mounted enclosure´s door access – notifying users when a door has been opened
- High sensitivity
- Easy operation
:
For the security of your data center, ATEN provides Photo Door sensor probes that work in tandem with the Power Distribution Units, which allows the monitoring of a rack mounted enclosure´s door access, notifying users when a door has been opened. Various conditions can be monitored with alarms according to customizable minimum/maximum settings.
* The Sensor is an optional accessory and you can use the ATEN PDU without the door sensors. However, if you want to have complete energy management of your data center with the full use of ATEN solutions, a sensor installation is required.
포장 내용물
- 1x Photo Door Sensor
- 1x Adjustment Tool
- 2x Screw
- 1x Bracket
- 1x Velcro
- The Photo Door Sensor allows the monitoring of a rack mounted enclosure´s door access – notifying users when a door has been opened
- High sensitivity
- Easy operation
감지 거리 | 10 cm |
동작 온도 | 10 - 30 VDC; Ripple<20% Peak to Peak |
전류 소비 | 30 mA(Max) |
출력 방식 | NPN & PNP Two Output |
출력 상태 | Normal open NO type |
출력 전류 | 150 mA(Max) |
누수 전류 | 0.8 mA(Max) |
잔류 전압 | 0.6 mA(Max) |
보호 회로 | Short Circuit & Polarity Protection |
센서 반응 시간 | 1 ms(Max) |
감도 조정 | 270° Trimmer |
이력현상 | 10% of Sensing Distance Max |
Emitter | Infrared LED |
조명 | Sunlight < 10,000Lux.; Lamplight < 5,000Lux. |
제품 외관 | |
재질 | Plastic |
EA1440
ATEN KVM over IP Solutions Online Trial
CV211 Online Trial
ATEN Unizon™ Trial Request
Buy from Your Favorite Store
Australia :
New Zealand :
비교 차트에 표시할 기능 선택
Please use link below to share this comparison table
Processing...