Where to buy | Partner Center | eShop

Inductive Proximity Door Sensor


For the security of your data center, ATEN provides Inductive Proximity Door sensor probes that work in tandem with the Power Distribution Units, which allows the monitoring of a rack mounted enclosure´s door access, notifying users when a door has been opened. Various conditions can be monitored with alarms according to customizable minimum/maximum settings.

* The Sensor is an optional accessory and you can use the ATEN PDU without the door sensors. However, if you want to have complete security management of your data center with the full use of ATEN solutions, a sensor installation is required.

**Support PE7/PE8/PE9 series only

Package Contents

  • 1x Inductive Proximity Door Sensor
  • 2x Screw
  • 1x Bracket
  • 1x Velcro
  • The Inductive Proximity Door Sensor allows the monitoring of a rack mounted enclosure’s door access – notifying users when a door has been opened
  • High sensitivity
  • Easy operation

Inductive Proximity Door Sensor

Operating voltage10-30 VDC
Ripple of power20% peak to peak
Current Consumption10 mA(Max)
Sensing distance5.0 mm
Hysteresis10% of sensing distance max
Response frequency800 Hz(Min)
Output methodPNP
Output current150 mA(Max)
Residual voltage0.1 V(max)
Leakage current0.8 mA(Max)
Protection circuitShort circuit & polarity reversed protection
Dielectric strength2.5 kv / 1 minute(Min)
Insulation strength100 MΩ / 500 VDC
Operating Temperature-20°C-80°C
Humidity35%-95% RH
Protection classIP-67
NoteFor some of rack mount products, please note that the standard physical dimensions of WxDxH are expressed using a LxWxH format.