| v3.3.327 |
New:
1. Support SSH passwordless login or SSH key-based authentication (Port Access > Preferences)
2. Added “Port Name Settings” function to change port names to default ones if serial devices are not online at specified time (Device Management > Device)
Enhancement:
1. Added “Enable host header protection” function protecting HTTP host header attacks (Device Management > Security > Misc.)
2. Added “Connection Security” option and allowed spaces in the SMTP password in SMTP settings (Device Management > ANMS > Event Destination > SMTP settings)
3. Added support for editing the filename of port logs saved in NFS server (Port Access > Properties > Port Buffering)
4. Added support for creating a folder in NFS server (write permission is allowed) where the SN device attempts to save port logs
5. Added support for selecting NFS sources in Port Buffering settings although NFS server is offline
6. Added support for editing the settings of user password and logout timeout in configure.json (unencrypted config file)
7. Added the function of “Copy Properties To” in console menu
8. Added “Auto Mount” info in the settings of NFS Mounting of console menu
9. Added support for enabling SMTP events/SNMP events/Syslog events/ATEN log of Notification Settings in console menu
10. Added commands for enabling/disabling SNMP agent, SNMP trap, SNMP events, SMTP events, and Syslog events
11. Added OID in MIB including NTP enabled/disabled, NTP IP, device timezone, SNMP agent community, SNMP trap enabled/disabled, SNMP trap receiver, Network Redundant NIC enabled/disabled, IPv6 enabled/disabled, Telnet service enabled/disabled, SSH service enabled/disabled, minimum username length, minimum password length, and external USB drive enabled/disabled
Bug & Security Fixes:
1. Fixed an issue where changes in the Notification Settings of console menu might not take effect
2. Fixed an incorrect description of the restore command in the help of CLI mode
3. Fixed an issue where “ symbol in baud rate settings of an unencrypted config might cause disconnection after restoring the config
4. Fixed an issue where changed NTP IP of an unencrypted config might not take effect after restoring the config
5. Fixed an issue where Syslog Settings for Port Logs might not display time info correctly
6. Fixed a compatibility issue with the USB console of Cisco Crystal 2960 series
7. Fixed an issue where CC2000 users cannot access SNViewer after “Allow users to access the device through viewer or its web login page” is disabled on CC2000
8. Fixed an issue where the device name of an SN device might not display correctly on CC2000
9. Fixed a security issue (CVE-2011-1473) |
* .exe firmware upgrade package can upgrade a SN device from your PC without logging in SN’s web GUI, but please make sure your PC and the SN device are in the same network segment. |
| v3.2.318 |
New:
1. Support IEEE 802.1X
2. Support SNMP Trap v3
3. Support UC232BF*
Enhancement:
1. Support MS-CHAP authentication for TACACS+
2. Support 2nd set of Syslog server in Device Management > ANMS > Event Destination > Syslog Server
3. Improved DHCP
4. Added MFG info in MIB file
Change:
1. Changed the severity level of sensor alert to less
Bug Fixes:
1. Fixed an issue where port data/time info is incorrect in Syslog notification. |
* SN11xxCO/SN01xxCO only
** .exe firmware upgrade package can upgrade a SN device from your PC without logging in SN’s web GUI, but please make sure your PC and the SN device are in the same network segment. |
| v3.2.316 |
New:
1. Support unencrypted configuration backup/restore (Only the settings of Device Management and Port Properties are modifiable)
2. Added 1 command to enable/disable service port 9000
Enhancement:
1. Added Daylight Saving Time option in Date/Time
2. Support the following special characters in the password of LDAP authentication
！# *（）% @ & , . $
3. Support the following special characters in the password of SNMP authentication
！# *（）% @ & , . $
4. Support the following special characters in the shared secret of RADIUS authentication
！# *（）% @ & , . $
5. Generate the log of NTP server connection every day instead of every hour
6. Added MFG info in MIB
7. Optimized port name auto discovery
Bug Fixes:
1. Port name auto discovery might detect incorrectly due to low baud rate and long port name
2. When security level in high or medium-high, the service port (161) of SNMP agent is open |
* Please use the latest MIB file (SN_Mibs_File_v1.8.179.006.zip) for SNMP service
** Please use the latest browser with HTML5 support
*** .exe firmware upgrade package can upgrade a SN device from your PC without logging in SN’s web GUI, but please make sure your PC and the SN device are in the same network segment. |
| v3.2.312 |
New:
1. Support WebClient* (Port Access > Connections)
2. Support serial devices through UC232B**
3. Support USB-console devices**
4. Added the global settings in Device Management > ANMS > Authentication & Authorization for default privilege of domain users (e.g. TACACS+ users).
Enhancement:
1. Support port name with special characters (e.g. #$%) and up to 48 characters
2. Added an option to enable/disable IPv6
3. Added SAN (Subjective Alternative Names) field in private certificate***
4. Added H/W ver. info in console menu (Device Management) and console CLI (read sysinfo)
5. Added Date/Time info in console menu (Date/Time Settings) and console CLI (read sysinfo)
6. Added commands for nfs settings, serial port settings, NTP settings, time zone, system time
7. Authorized general users can manage and access serial ports through console CLI
8. General users can change their password through console CLI
9. Enhanced Virtual COM driver (v3.0.291) to run as daemon in Windows
Bug Fixes:
1. Fixed an issue where connection might fail to work when a SN device and connected network switch boot up at the same time, and network switch system is ready after the SN device.
2. Fixed an issue where the device name in LLDP is not updated after the device name is changed through Web or Telnet/SSH connection
3. After device name is modified, it cannot update in LLDP
4. Fixed CVE-2023-48795 security vulnerability
5. Fixed an issue where the settings of serial ports might become default value after firmware upgrade
6. Fixed an issue where an error character might occur if “Enter” key is kept pressing is kept
7.The input settings of NFS can be kept even if the system fails to mount a NFS storage device through console menu
Changes:
1.Display Chassis ID with “eth” instead of “ethIf” in LLDP |
* Please use the latest browser with HTML5 support
** SN01xxCO/SN01xxCOD only
*** Windows Certificate Services is not supported
**** .exe firmware upgrade package can upgrade a SN device from your PC without logging in SN’s web GUI, but please make sure your PC and the SN device are in the same network segment. |
| v3.1.305 |
Enhancements:
1. Enhanced LLDP and changed String to MAC address as Chassis Type.
2. Enhanced the number of DHCP retry times
3. The input settings of NFS can be kept even if the system fails to mount a NFS storage device
4. Restore configuration file from SN (-AX) models supported
Bug Fixes:
1. Fixed an issue where power supply detection (SN01xx series) might fail to work
2. Fixed an issue where a NFS storage cannot be mounted through SSH/Telnet console
3. Fixed an issue where SNMP might fail to work during query
4. Fixed an issue where firmware upgrade might fail to work through command line
5. Fixed an issue where redundant NIC might fail to work
Changes:
1. In NFS settings, the column title ‘Auto’ is changed to ‘Mount At Startup’ |
|
| v3.1.303 |
Bug Fixes:
1. Fixed a flow control issue in serial settings that might cause no keyboard input
2. Fixed a power detection issue for SN01xxCO that might detect incorrectly
3. Fixed a NFS mounting issue
4. Fixed a compatibility issue of JRE-8u351 or above for SNViewer |
|
| v3.1.302 |
1. Fixed a disconnection issue that might occur when users enable/disable “Redundant NIC”a couple times in SN terminal |
|
| v3.0.299 |
New:
1. Add CLI mode in Telnet/SSH console*
2. Support LLDP
Enhancements:
1. Add vendor and model info in sysObjectID of SNMP MIB
2. Add CPU and memory usage info in SNMP MIB
Bug Fixes:
1. Fixed an issue that SSH/Telnet connection might not work due to flow control in serial port settings
2. Fixed an issue that network settings might not be effective after change through SSH/Telnet console or IP Installer in Redundant NIC mode |
|
| v3.0.292 |
Initial version |
v3.x.x version is for hardware platform, H/W: AXA, of SN01/91 series only.
Please do NOT upgrade it with old hardware platform, H/W: AX.
To check what hardware platform you have, please go to About window of SN's Web GUI. |
