| v1.1.105 |
New:
1. Support USB 4G LTE dongle, ZTE MF79U (Device Management > Network > Network Information > Mobile/WiFi Network Configuration)
2. Support SSH passwordless login or SSH key-based authentication (Port Access > Preferences)
3. Added “Port Name Settings” function to change port names to default ones if serial devices are not online at specified time (Device Management > Device)
Enhancement:
1. Added “Enable host header protection” function protecting HTTP host header attacks (Device Management > Security > Misc.)
2. Added “Connection Security” option and allowed spaces in the SMTP password in SMTP settings (Device Management > ANMS > Event Destination > SMTP settings)
3. Added support for editing the filename of port logs saved in NFS server (Port Access > Properties > Port Buffering)
4. Added support for creating a folder in NFS server (write permission is allowed) where the SN device attempts to save port logs
5. Added support for selecting NFS sources in Port Buffering settings although NFS server is offline
6. Added support for editing the settings of user password and logout timeout in configure.json (unencrypted config file)
7. Added the function of “Copy Properties To” in console menu
8. Added “Auto Mount” info in the settings of NFS Mounting of console menu
9. Added support for enabling SMTP events/SNMP events/Syslog events/ATEN log of Notification Settings in console menu
10. Added commands for enabling/disabling SNMP agent, SNMP trap, SNMP events, SMTP events, and Syslog events
11. Added OID in MIB including NTP enabled/disabled, NTP IP, device timezone, SNMP agent community, SNMP trap enabled/disabled, SNMP trap receiver, Network Redundant NIC enabled/disabled, IPv6 enabled/disabled, Telnet service enabled/disabled, SSH service enabled/disabled, minimum username length, minimum password length, and external USB drive enabled/disabled
Bug & Security Fixes:
1. Fixed an issue where changes in the Notification Settings of console menu might not take effect
2. Fixed an incorrect description of the restore command in the help of CLI mode
3. Fixed an issue where “ symbol in baud rate settings of an unencrypted config might cause disconnection after restoring the config
4. Fixed an issue where changed NTP IP of an unencrypted config might not take effect after restoring the config
5. Fixed an issue where Syslog Settings for Port Logs might not display time info correctly
6. Fixed a compatibility issue with the USB console of Cisco Crystal 2960 series
7. Fixed an issue where CC2000 users cannot access SNViewer after “Allow users to access the device through viewer or its web login page” is disabled on CC2000
8. Fixed an issue where the device name of an SN device might not display correctly on CC2000
9. Fixed a security issue (CVE-2011-1473) |
* .exe firmware upgrade package can upgrade a SN device from your PC without logging in SN’s web GUI, but please make sure your PC and the SN device are in the same network segment. |
| v1.0.079 |
New:
1. Support IEEE 802.1X
2. Support SNMP Trap v3
3. Support UC232BF*
Enhancement:
1. Support MS-CHAP authentication for TACACS+
2. Support 2nd set of Syslog server in Device Management > ANMS > Event Destination > Syslog Server
3. Improved DHCP
4. Added MFG and sensor info in MIB file
Change:
1. Changed the severity level of sensor alert to less
Bug Fixes:
1. Fixed an issue where port data/time info is incorrect in Syslog notification. |
* SN11xxCO/SN01xxCO only
** .exe firmware upgrade package can upgrade a SN device from your PC without logging in SN’s web GUI, but please make sure your PC and the SN device are in the same network segment. |
| v1.0.077 |
New:
1. Support CC2000
2. Support CCVSR
3. Support unencrypted configuration backup/restore (Only the settings of Device Management and Port Properties are modifiable)
4. Added 1 command to enable/disable service port 9000
5. Added the global settings in Device Management > ANMS > Authentication & Authorization for default privilege of domain users (e.g. TACACS+ users).
Enhancement:
1. Added Daylight Saving Time option in Date/Time
2. Support the following special characters in the password of LDAP authentication
！# *（）% @ & , . $
3. Support the following special characters in the password of SNMP authentication
！# *（）% @ & , . $
4. Support the following special characters in the shared secret of RADIUS authentication
！# *（）% @ & , . $
5. Generate the log of NTP server connection every day instead of every hour
6. Added MFG info in MIB
7. Optimized port name auto discovery
8. Added pulse function in close & open status for relay port**
9. The content of summary in device information of device settings of CC2000 is optimized
1. Support port name with special characters (e.g. #$%) and up to 48 characters
2. Added an option to enable/disable IPv6
3. Added SAN (Subjective Alternative Names) field in private certificate***
4. Added H/W ver. info in console menu (Device Management) and console CLI (read sysinfo)
5. Added Date/Time info in console menu (Date/Time Settings) and console CLI (read sysinfo)
6. Added commands for nfs settings, serial port settings, NTP settings, time zone, system time
7. Authorized general users can manage and access serial ports through console CLI
8. General users can change their password through console CLI
Bug Fixes:
1. Port name auto discovery might detect incorrectly due to low baud rate and long port name
2. When security level in high or medium-high, the service port (161) of SNMP agent is open
Changes:
1.Display Chassis ID with “eth” instead of “ethIf” in LLDP |
* .exe firmware upgrade file can upgrade a SN device from your PC without logging in SN’s web GUI, but please make sure your PC and the SN device are in the same network segment.
** Please refer to the user manual for the behavior of pulse function in close status and in open status. |
