Where to buy | Partner Portal | eShop

VGA/Audio/RS-232 Cat 5 Repeater with Dual Output (1600 x 1200@150m)

Discontinued
VB552
  • Uses Cat 5e cable to extend audio/video signal
  • Extends the transmission range an extra 150m
  • High-quality video - up to 1920x1200@60Hz at 30m, 1600x1200@60Hz at 150m, 1280x1024@60Hz at 200m
  • Audio and serial enabled
MSRP: Quote Upon Request

DISCONTINUED

The VB552 VGA Over Cat 5 Repeater +Audio is an audio/video signal extension device which is compatible with ATEN Cat 5 Audio/Video splitters. The VB552 extends the audio/video transmission range an extra 150m over Cat 5e (or higher) cables. The use of an additional repeater means the audio/video signals can be transmitted over even longer distances, up to 450m.

Furthermore, for longer distance installations where video signals may degrade, the VB552 has adjustable video gain and compensation controls to provide the sharpest video quality possible. An IR remote control also provides picture control at the remote site.
Rack-mountable, with two RS-232 channels on the unit for selection, and support for high video resolutions, the VB552 is the perfect solution to extend the range of your A/V and serial transmissions in any installation environment requiring VESA FDMI mount standards.

Package Contents

  • 1x VB552 VGA Over Cat 5 Repeater + Audio
  • 1x Power Adapter
  • 1x Infrared Remote Control Handset
  • 1x Infrared Receiver
  • 1x IR Receiver Holder
  • 1x Mounting Kit
  • 1x User Instructions
  • Uses Cat 5e cable to extend audio/video signal
  • Extends the transmission range an extra 150m
  • High-quality video - up to 1920x1200@60Hz at 30m, 1600x1200@60Hz at 150m, 1280x1024@60Hz at 200m
  • Audio and serial enabled
  • Two gain control modes for sharpest picture quality
  • Video gain and compensation adjustable via OSD
  • IR receiver for quick and easy video quality adjustment
  • IR remote control for screen on/off and video adjustment at remote site
  • Provide a RS-232 channel for selection*
  • Follows VESA FDMI mount standard
  • Supports DDC for the local monitor
  • Supports VGA, SVGA, XGA, SXGA, UXGA and multisync monitors
  • For use in combination with VS1504/VS1508 Audio/ Video splitter
    * Only one RS-232 channel can be selected at a time
Video Output
Interfaces2 x HDB-15 Female (Blue)
Impedance75 Ω
Max. Distance1.8 m
Video
Max. Bandwidth300 MHz
Max. Resolutions / DistanceUp to 1920 x 1200@60Hz@30m; 1600 x 1200@60Hz@150m
Audio Outputs
Interfaces2 x Mini Stereo Jack Female (Green)
Control
RS-232Connector: 2 x DB-9 Male (Black)
Connectors
Power1 x DC Jack (Black)
Power ConsumptionDC5.3V:4.92W:23BTU/h

Note:
● The measurement in Watts indicates the typical power consumption of the device with no external loading.
● The measurement in BTU/h indicates the power consumption of the device when it is fully loaded.
Environmental
Operating Temperature0 - 50°C
Storage Temperature-20 - 60°C
Humidity0 - 80% RH, Non-Condensing
Physical Properties
HousingMetal
Weight0.35 kg ( 0.77 lb )
Dimensions (L x W x H)13.90 x 8.80 x 2.86 cm
(5.47 x 3.46 x 1.13 in.)
Carton Lot5 pcs
NoteFor some of rack mount products, please note that the standard physical dimensions of WxDxH are expressed using a LxWxH format.