Where to buy | Partner Portal | eShop

20A/16A 8-Outlet 1U Metered & Switched eco PDU


PE6208
  • Remote power outlet control (On, Off, Power Cycle) by individual outlets
  • Real-time current, voltage, and kWH displayed in a browsed-based UI for monitoring at the PDU level
  • Proactive Overload Protection (POP) – automatically powers off outlets in the user-defined sequence when a current overload occurs in protecting the powered devices
  • Network Interfaces: TCP/IP, UDP, HTTP, HTTPS, SSL, SMTP, DHCP, NTP, DNS, 10Base-T/100Base-TX, auto sense, Ping, Telnet
MSRP: Quote Upon Request

• 8 outlets
• 20A (UL derated 16A) / 16A
PDU Power Measurement
The PE6208 eco PDU is intelligent PDUs that contains 8 AC outlets and is available in various IEC or NEMA socket configurations. It provides secure, centralized, intelligent, power management (power on, off, cycle) of data center IT equipment (servers, storage systems, KVM switches, network devices, serial data devices, etc.), as well as the ability to monitor the center's health environment via sensors*.

The eco PDUs offer remote power control combined with real-time power measurement - allowing you to control and monitor the power status of devices attached to the PDUs at the PDU device level from practically any location via a TCP/IP connection.

The eco PDU supports any 3rd party v3 SNMP Manager Software and the eco DC (Energy Management Web GUI). The eco DC provides you with an easy method for managing multiple devices, offering an intuitive and user-friendly Graphical User Interface that allows you to configure a PDU device and monitor power status of the equipment connected to it. With the eco DC, the Sensor-enabled eco PDU also offers comprehensive power analysis reports which can separate by departments and locations, providing precise measurements of current, voltage, power and watt-hour in a real-time display.

With its advanced security features and ease of operation, the eco PDU is the most convenient, most reliable, and most cost effective way to remotely manage power access for multiple computer installations and allocate power resources in the most efficient way possible.

*Sensors are optional accessories. A sensor-enabled installation is required to generate a more complete energy-efficient data and chart. Higher sensor installation density is helpful to generate more accurate data.

Package Contents

  • 1x PE6208 Power Distribution Unit
  • 1x Power Cord
  • 1x Rack Mount Kit
  • 1x User Instructions
  • Power Distribution
  • Space saving 1U rack mount design with rear mounting
  • IEC or NEMA outlet models
  • 3 digit 7-segment front panel LED shows Current / IP Address
  • Remote users can monitor outlet status via web pages on their browsers
  • Safe shutdown support
  • Separate power for the unit's own power and its power outlets. The user interface is still accessible even when an overload condition trips the devices' circuit breaker


    Remote Access
  • Remote power control via TCP/IP and a built in 10/100 Ethernet port
  • Network Interfaces: TCP/IP, UDP, HTTP, HTTPS, SSL, SMTP, DHCP, NTP, DNS, 10Base-T/100Base-TX, auto sense, Ping, Telnet
  • eco PDU Power Management software – eco DC
  • Supports SNMP Manager V3


    Operation
  • Remote power outlet control (On, Off, Power Cycle) by individual outlets
  • Power-on sequencing – users can set the power on sequence and delay time for each port to allow equipment to be turned on in the proper order
  • Easy setup and operation via a browser-based user interface
  • Multibrowser support (IE, Firefox, Chrome, Safari)
  • RTC support to keep the timer running during times of no power.
  • Supports up to 8 user and 1 administrator accounts
  • Proactive Overload Protection (POP) – automatically powers off outlets in the user-defined sequence when a current overload occurs in protecting the powered devices


    Management
  • Power status measurement at the PDU level
  • LED indicators for current and IP address at the PDU device level
  • Real-time current, voltage, and kWH displayed in a browsed-based UI for monitoring at the PDU level
  • Current and voltage threshold setting
  • Naming support for outlets
  • User outlet access assignment on an outlet-by-outlet basis.
  • Event logging and syslog support
  • Upgradeable firmware
  • Multilanguage support: English, German, Traditional Chinese, Simplified Chinese, Japanese, French, Spanish, Italian


    Security
  • Two-level password security
  • Strong security features include password protection and advanced encryption technologies – 128 bit SSL
  • Remote authentication support: RADIUS


    eco DC Energy Management Software
  • Automatic discovery of all PE devices within the same intranet
  • Remote real-time power measurement and monitoring
  • Remote real-time power outlet management*
  • Remote real-time environment sensor monitoring
  • Plotting/Monitoring of all PE devices
  • Exceed threshold alert through SMTP and Syslog
  • Power Analysis Report
FunctionPE6208APE6208BPE6208G
Electrical
Nominal Input Voltage100 – 120 VAC100 – 240 VAC100 – 240 VAC
Maximum Input Current20A Max; 16A(UL de-rated)20A Max; 16A(UL de-rated)16A Max
Input Frequency50-60 Hz50-60 Hz50-60 Hz
Input ConnectionPE6208A-ATA-A : NEMA 5 -20P
PE6208A-ATA-J : NEMA L5-20P
PE6208B-ATA-B : NEMA 6 -20P
PE6208B-ATA-J : NEMA L6 -20P
IEC 60320 C20
Input Power2400 VA(Max); 1920 VA(UL de-rated)4160 VA(Max); 3328 VA(UL de-rated)3680 VA(Max)
Outlet TypeTotal : 8 x NEMA 5-20RTotal : 7 x IEC320 C13 + 1 x IEC320 C19Total : 7 x IEC320 C13 + 1 x IEC320 C19
Nominal Output Voltage100 – 120 VAC100 – 240 VAC100 – 240 VAC
Maximum Output Current (Outlet)NEMA 5-20R: 20A(Max); 16A(UL de-rated)C13: 15A(Max); 12A(UL de-rated)
C19: 20A(Max); 16A(UL de-rated)
C13: 10A(Max)
C19: 16A(Max)
Maximum Output Current (Bank)20A(Max); 16A(UL de-rated)20A(Max); 16A(UL de-rated)16A(Max)
Maximum Output Current (Total)20A(Max); 16A(UL de-rated)20A(Max); 16A(UL de-rated)16A(Max)
Breakers1 x 20A Non-Fuse Breaker1 x 20A Non-Fuse Breaker1 x 16A Non-Fuse Breaker
MeteringBank level Current, Voltage, VA , PF and KWh MonitoringBank level Current, Voltage, VA , PF and KWh MonitoringBank level Current, Voltage, VA , PF and KWh Monitoring
Outlet SwitchingYesYesYes
Environment Sensor Ports222
Metering AccuracyVoltage Range: 100VAC ~ 250VAC +/-1%
Power Range: 100W ~ Maximum Capacity +/- 2%
Current Range: 0.1A~1A +/- 0.1A, 1A~20A +/-1%
Voltage Range: 100VAC ~ 250VAC +/-1%
Power Range: 100W ~ Maximum Capacity +/- 2%
Current Range: 0.1A~1A +/- 0.1A, 1A~20A +/-1%
Voltage Range: 100VAC ~ 250VAC +/-1%
Power Range: 100W ~ Maximum Capacity +/- 2%
Current Range: 0.1A~1A +/- 0.1A, 1A~20A +/-1%
Physical Properties
Dimensions (L x W x H)43.24 x 22.04 x 4.40 cm
(17.02 x 8.68 x 1.73 in.)
43.24 x 22.04 x 4.40 cm
(17.02 x 8.68 x 1.73 in.)
43.24 x 22.04 x 4.40 cm
(17.02 x 8.68 x 1.73 in.)
Weight2.79 kg ( 6.15 lb )2.79 kg ( 6.15 lb )2.79 kg ( 6.15 lb )
Power Cord Length3 m3 m3 m
Environmental
Temperature (Operating / Storage)0 – 50°C / -20 – 60°C0 – 50°C / -20 – 60°C0 – 50°C / -20 – 60°C
Humidity (Operating & Storage)0 – 80% RH, Non-Condensing0 – 80% RH, Non-Condensing0 – 80% RH, Non-Condensing
Compliance
EMC VerificationFCC, Others by RequestFCC, Others by RequestCE, Others by Request
Safety VerificationTUV-CB, cTUVus, UL, Others by RequestTUV-CB, cTUVus, UL, Others by RequestTUV-CB, CE-LVD, Others by Request
NoteFor some of rack mount products, please note that the standard physical dimensions of WxDxH are expressed using a LxWxH format.






DescriptionVer.Release DateFile Name
Firmware Upgradev2.5.2422024-09-26 pe8-v2.5.242.zip
Firmware Upgradev2.5.2412024-08-13 pe8-v2.5.241.zip
Firmware Upgrade (For solving login fail issue)v2.4.2392024-05-02 pe8-v2.4.239.zip
Firmware Upgradev2.4.2322022-11-22 pe8_v2.4.232.zip
Firmware Upgradev2.4.2312022-11-21 pe8_v2.4.231.zip
Firmware Upgradev2.3.2282022-01-21 pe8_v2.3.228.zip
Firmware Upgradev2.3.2272021-09-27 pe8_v2.3.227.zip
Firmware Upgradev2.3.2262021-08-27 pe8_v2.3.226.zip
Firmware Upgradev2.3.2222021-03-09 pe8_v2.3.222.zip
Firmware Upgradev2.2.2122020-10-06 pe8_v2.2.212.zip
Firmware Upgradev2.1.2092020-04-10 pe8_v2.1.209.zip
Firmware Upgradev2.1.2072020-02-12 pe8_v2.1.207.zip
Firmware Upgradev2.1.2012020-02-12 pe8_v2.1.201.zip
Firmware Upgradev1.9.1872018-11-01 pe8_v1.9.187.zip
Firmware Upgradev1.9.1862018-08-13 pe8_v1.9.186.zip
Firmware Upgradev1.9.1842017-11-23 pe8_v1.9.184.zip
Firmware Upgradev1.9.1832017-11-23 pe8_v1.9.183.zip
Firmware Upgradev1.9.1812017-03-01 PE8_v1.9.181.zip
Firmware Upgradev1.8.1782016-12-27 PE8_v1.8.178.zip
Firmware Upgradev1.8.1742016-09-07 PE8_v1.8.174.zip
Firmware Upgradev1.7.1672016-02-22 pe6108_6208_v1.7.167.zip
Firmware Upgradev1.6.1592015-09-03 pe6108_6208_v1.6.159.zip
Firmware Upgradev1.5.1482014-12-11 pe6108_6208_v1.5.148.zip
Firmware Upgradev1.1.1332014-06-19 pe6108_6208_v1.1.133.zip
Firmware Upgradev1.1.1182013-09-06 pe6108_6208_v1.1.118.zip
Firmware Upgradev1.1.1092013-03-25 pe6108_pe6208_v1.1.109.bin
Firmware Upgradev1.0.0632012-02-10 PE8_v1.0.063.bin
ОSDescriptionVer.Release DateFile Name
IP Installer
IP Installerv1.4.1322012-02-10 IPInstaller-ALTUSEN_v1.4.132.zip
MIB File
MIB Filev1.1.1152015-05-05 PE_MIB_File_v1.1.115.zip
PE MIB Filev1.1.1122014-06-19 PE8_MIB_File_v1.1.112.tar
PE MIB Filev1.1.1092013-09-06 PE8_MIB_File_v1.1.109.tar
PE MIB Filev1.0.0632012-02-10 PE8_MIB_File_v1.0.063.zip
Other
LinuxPMonitorv1.12012-02-10 PowerMonitor_v1.1.zip
WindowsPMonitorv1.0.0812012-02-10 PMonitorSrv_v1.0.081.zip
We are here to help! Please visit ATEN eService for technical assistance.