Де купити | Partner Portal | eShop

6-Port IR/Serial Expansion Box


VK236
MSRP: Quote Upon Request
 
Add to Quote Cart
  • An Ethernet-to-IR / serial box ships with 6 IR / serial ports
  • Supports Power over Ethernet (PoE) or DC power supply
  • Supports Telnet CLI (command-line interface) mode for third-party system integration
  • An expansion solution for connecting more IR / serial devices to ATEN Control System
Good Design Award 2022
iF Design Award 2023
3 Years Warranty
VK-open-API-Product
ATEN Unizon
ControlSystem
ATEN_Certified_Drivers

The VK236 provides Ethernet-to-IR/serial connectivity with 6 IR / serial ports. It allows users to remotely access IR / serial devices from a PC or any system located anywhere. The complete Telnet CLI commands are fully integrated into users’ commercial and industrial applications.

What’s more, the VK236 serves as a flexible expansion box of the ATEN Control System, enabling users to control additional IR / serial devices through an ATEN controller in any environments where more devices are required. With the advantage of Ethernet-based connection, the expansion box can be easily connected to controllers via LAN connection from a variety of locations across a network.

Accessories:
*The power adapter for this product is sold separately. For more information about this accessory, see Accessories.

Package Contents

  • 1x VK236 6-Port IR/Serial Expansion Box
  • 1x Mounting Kit
  • 6x Terminal Blocks
  • 1x User Instructions
  • An Ethernet-to-IR / serial box ships with 6 IR / serial ports
  • Supports Power over Ethernet (PoE) or DC power supply
  • Supports Telnet CLI (command-line interface) mode for third-party system integration
  • Supports Pronto formatted IR codes- IR command codes can be entered in Hex format
  • WebUI provides VK236 system information, including firmware upgrade
  • An expansion solution for connecting more IR / serial devices to ATEN Control System
  • Flexible deployment via Ethernet connection
  • Works with a connected ATEN controller with ID Switch through instant configuration
Interfaces
IR/Serial6 x Programmable IR / Uni-directional RS-232 Port
6 x 2-Pole Terminal Block Connector
IR: TTL level (0 to 5 V)
– Carrier Frequency: 10KHz~455KHz;
Serial: Uni-directional RS-232 ( + - 5 V)
– Baud Rate: 300 to 115200 (default: 9600);
– Data Bit: 8 (default) or 7;
– Stop Bit: 1 (default) or 2;
– Parity: None (default), Even or Odd
Ethernet• 1 x RJ-45 Female, 10/100Base-T
• Supported Protocol: ARP, ICMP, TCP/IP, DHCP, HTTPS, SSH
• DHCP-enabled. The following default IP settings will be used if no IP is assigned within 30 seconds:
IP: 192.168.0.60
Subnet Mask: 255.255.255.0
Switches
Controller ID1 x 16-segment Switch
Expander ID1 x 8-segment Switch
Reset Button1 x Semi-recessed Pushbutton
USB1 x USB Type A (Firmware upgrade only)
Power ConsumptionDC5V:1.31W:17BTU/h
DC48V:1.64W:18BTU/h

Note:
● The measurement in Watts indicates the typical power consumption of the device with no external loading.
● The measurement in BTU/h indicates the power consumption of the device when it is fully loaded.
Environmental
Operating Temperature0 – 50°C
Storage Temperature–20 – 60°C
Humidity0 - 80% RH, Non-Condensing
Physical Properties
HousingMetal
Weight0.45 kg ( 0.99 lb )
Dimensions (L x W x H)13.00 x 7.58 x 4.20 cm
(5.12 x 2.98 x 1.65 in.)
NoteFor some of rack mount products, please note that the standard physical dimensions of WxDxH are expressed using a LxWxH format.

Success Stories

Chiang Mai University – AV & Control Solution for Interactive Classrooms – Thailand

Datasheet

vk236_expander_ds_en.pdf (943.84 KB)
DescriptionVer.Release DateFile Name
Firmware Upgradev3.6.3552023-10-26 vk236-v3.6.355.zip
Firmware Upgradev3.4.3342023-03-28 vk236_v3.4.334.001.zip
Firmware Upgradev3.4.3332022-12-27 vk236_v3.4.333.001.zip
Firmware Upgradev3.1.3022021-12-02 vk236_v3.1.302.002.zip
Firmware Upgradev3.0.2942021-05-25 vk236_v3.0.294.002.zip
Firmware Upgradev2.8.2712020-11-13 vk236_v2.8.271.zip
Firmware Upgradev2.6.2532020-01-17 vk236_v2.6.253.zip
Firmware Upgradev2.2.2132019-04-22 vk236_v2.2.213.zip
Firmware Upgradev2.1.2042017-12-08 vk236_v2.1.204.zip
Firmware Upgradev2.0.1912016-12-06 vk236_v2.0.191.zip
Firmware Upgradev1.6.1562016-11-22 vk236_v1.6.156.zip
ОSDescriptionVer.Release DateFile Name
ATEN Certified Drivers
Drivers for ATEN Control System
Search for drivers
Firmware Upgrade Tool
Firmware upgrade toolv1.2.1132021-12-21 FirmwareUpgradeTool_Setup_v1.2.113.zip
Firmware upgrade toolv1.1.1062018-01-09 FirmwareUpgradeTool_Setup_v1.1.106.zip
Firmware upgrade toolv1.1.1042017-10-18 FirmwareUpgradeTool_Setup_v1.1.104.zip
Firmware upgrade toolv1.0.0662016-12-09 FirmwareUpgradeTool_Setup_V1.0.066.zip
IP Installer & Utility
IP Installerv1.4.1322014-09-23 IPInstaller_v1.4.132.zip
Modules
AMX® Module *v1.02023-03-14 AMX-Module-for-ATEN-Control-System-v1.0.zip
Crestron® Module *v1.02023-03-14 Crestron-Module-for-ATEN-Control-System-v1.0.zip
* The information contained is the property of ATEN International Co. LTD or their respective owners. All rights reserved. AMX is a trademark and a brand name of HARMAN International. Crestron is a trademark of Crestron Electronics, Inc., registered in the U.S. and other countries and regions. Any other brand names or marks are used for compatibility description only and are trademarks or registered trademarks of their respective owners.
We are here to help! Please visit ATEN eService for technical assistance.
Contact Us
Buy from Your Favorite Store
Australia :
New Zealand :