ATEN Control System - 12-button Control Pad (EU, 2 Gang)
VK0200
- Fully-customizable 12-button Control Pad that integrates a controller with a keypad
- Supports various control interface connections: 2x RS-232 ports, 2x relay channels, 1x digital input, and 1x Ethernet port
- 125 layout combinations of 6 to 12 buttons
- Available in black or white color
The VK0200 is a fully-customizable 12-button Control Pad that integrates a controller with a keypad as an all-in-one solution. Aimed for small/medium meeting room or classroom control, the VK0200 offers a ready-to-use solution that easily connects the devices, configures via the intuitive VK6000 Configurator Software, and flexibly customizes keypad button functions and layout to fulfill most applications.
The ATEN Control System is an Ethernet-based management system that connects all the hardware devices found in a room for centralized control effortlessly. The VK0200 Control Pad not only plays the role as the main controller that connects the hardware
Note: This model is also available in black color – Part number: VK02001, which is a built-to-order product. To place an order, please contact your regional ATEN representative.
Keypad Layout Example
Custom button placement on the Control Pad can be set in 125 different combinations of 6 to 12 buttons. The example above shows the 12 most commonly used.
VK0200TTK
VK0200TTK includes a VK0200 unit and an ergonomically designed keypad tabletop kit compatible with VK0200’s black / white editions, further enhancing the ease-of-use. For more information, please contact your regional ATEN representative.
Accessories:
*The power adapter for this product is sold separately. For more information about this accessory, see Accessories.
Package Contents
- 1x VK0200 12-button Control Pad
- 1x Button Pack
- 6x Terminal Blocks
- 1x Faceplate
- 1x User Instructions
- Supports various interface connections:
• 2 x RS-232 ports
• 2 x Relay channels
• 1 x Digital input channel
• 1 x Ethernet port - Designed to mount in 2-gang EU-type and MK-type junction boxes
- Fully customizable with 125 layout combinations of 6 to 12 buttons
- Available in black or white color
- Web Viewer – integrated with 3rd-party systems or any web-based console for easier room equipment management
- Supports native KNX IP for building management systems
- TCP, UDP, Telnet, HTTP, HTTPS, WebSocket, ONVIF, and PJLink compliant
- Supports Modbus protocol – enables integration with Modbus devices, including TCP, RTU and its checksum data
- Supports Telnet CLI (command-line interface) mode for third-party system integration
- Supports project file backup1
- Web GUI for easy system configuration
- Supports SSH communication for data monitoring2
- LED indication of connection and hardware status
- Dual-color LEDs for clear indication in dark environments
- Dual power supplies – Power over Ethernet (PoE) and DC 5V (optional)
- Customized button engraving service
- Allows for remote control via mobile device3
- Flexible installation is made easier with the keypad tabletop kit (VK0200TTK), allowing for device mounting on the table or to the wall
Note:
1. Each ATEN Control Box is capable of backing up one project file.
2. The SSH protocol can be used for monitoring the receiving / transmission data of the Control Pad.
3. Mobile device control requires a license. Please refer to the Specifications or contact your local sales representative for more details about licenses.
Interfaces | |
Keypad Layout | 6~12 buttons customizable in 125 keypad layouts |
Serial | • 2 x Bi-directional RS-232 Port (2 x 3-Pole Terminal Block Connector); – Baud Rate: 300 to 115200 (default: 9600); – Data Bit: 8 (default) or 7; – Stop Bit: 1 (default) or 2; – Parity: None (default), even or odd |
Relay | • 2 x Relay Channel (2 x 2-Pole Terminal Block Connector); • Normally open, isolated Relays; • Contact Rating: Max 24 VDC, 1A |
I/O | • 1 x Digital Input Channel (1 x 2-Pole Terminal Block Connector); – VDC Mode Input Voltage Range: 0 to 5 VDC; Programmable Range: 1 to 5 VDC; – Dry Contact Mode Pull-up 2k ohms to + 5 VDC |
Ethernet | • 1 x RJ-45 Female, 10/100Base-T • Supported Protocol: ARP, ICMP, TCP/IP, DHCP, HTTPS, SSH • DHCP-enabled. The following default IP settings will be used if no IP is assigned within 30 seconds: IP: 192.168.0.60 Subnet Mask: 255.255.255.0 |
Switches | |
Controller ID | 1 x 16-segment Switch |
Reset Button | 1 x Semi-recessed Pushbutton |
Power Consumption | DC5V:1.15W:5BTU/h POE:1.44W:7BTU/h Note: ● The measurement in Watts indicates the typical power consumption of the device with no external loading. ● The measurement in BTU/h indicates the power consumption of the device when it is fully loaded. |
Environmental | |
Operating Temperature | 0 – 50°C |
Storage Temperature | –20 – 60°C |
Humidity | 0 - 80% RH, Non-Condensing |
Physical Properties | |
Housing | Plastic |
Weight | 0.19 kg ( 0.42 lb ) |
Dimensions (L x W x H) | 8.32 x 14.76 x 4.80 cm (3.28 x 5.81 x 1.89 in.) |
License | |
Max. No. Allowed | 10 licenses |
Note | Each time a mobile device connects to an ATEN Control Pad for remote control, one license on the Control Pad will be occupied. To purchase and add additional licenses to your ATEN Control Pad, contact your local sales representative for more information. |
Note | For some of rack mount products, please note that the standard physical dimensions of WxDxH are expressed using a LxWxH format. |
User Manual
File Name | Release Date |
vk0100-vk0200-vk108us-vk112EU-vk1100a-vk1200-vk2100a-vk2200-vk320-vk330-vk401-vk6000-user-manual-w.pdf (15.07 MB) | 2024-08-13 |
ATEN_Control_System_CLI_2022-10-13.pdf (73.05 KB) | 2022-10-13 |
Quick Start Guide
vk0200_controller_qsg.pdf (1.47 MB) vk0200ttk-vk112euttk-tabletop-kit-qsg.pdf (1.08 MB)Firmware
Description | Ver. | Release Date | File Name |
Firmware Upgrade | v3.7.369 | 2024-07-02 | vk0200-v3.7.369.zip |
Firmware Upgrade | v3.6.357 | 2023-10-26 | vk0200-v3.6.357.zip |
Firmware Upgrade | v3.4.336 | 2023-03-28 | vk0200_v3.4.336.001.zip |
Firmware Upgrade | v3.4.335 | 2023-02-21 | vk0200_v3.4.335.001.zip |
Firmware Upgrade | v3.3.322 | 2022-07-12 | vk0200_v3.3.322.001.zip |
Firmware Upgrade | v3.2.316 | 2022-04-25 | vk0200_v3.2.316.001.zip |
Firmware Upgrade | v3.0.298 | 2021-08-19 | vk0200_v3.0.298.001.zip |
Firmware Upgrade | v3.0.296 | 2021-07-22 | vk0200_v3.0.296.003.zip |
Firmware Upgrade | v3.0.294 | 2021-05-25 | vk0200_v3.0.294.002.zip |
Firmware Upgrade | v2.8.274 | 2020-12-21 | vk0200_v2.8.274.001.zip |
Firmware Upgrade | v2.7.263 | 2020-04-17 | vk0200_v2.7.263.001.zip |
Firmware Upgrade | v2.6.255 | 2019-12-30 | vk0200_v2.6.255.001.zip |
Firmware Upgrade | v2.5.243 | 2019-05-06 | vk0200_v2.5.243.004.zip |
Firmware Upgrade | v2.4.234 | 2019-02-01 | vk0200_v2.4.234.003.zip |
Software & Drivers
ОS | Description | Ver. | Release Date | File Name |
ATEN Certified Drivers | ||||
Drivers for ATEN Control System |
Search for drivers | |||
Firmware Upgrade Tool | ||||
Firmware upgrade tool | v1.2.113 | 2021-12-21 | FirmwareUpgradeTool_Setup_v1.2.113.zip | |
IP Installer & Utility | ||||
IP Installer | v1.4.132 | 2014-09-23 | IPInstaller_v1.4.132.zip |