Where to buy | Partner Portal | eShop

30A 42-Outlet Metered Thin Form Factor eco PDU

  • Bank level power metering and monitoring
  • Thin form factor design with 56 mm width
  • Supports TCP/IP, UDP, HTTP, HTTPS, SSL, DHCP, SMTP, NTP, DNS, Auto Sense, Ping, Telnet, and SNMP V1,V2&V3
  • Lok-U-Plug & EZ-Lok – easily secures power cable to PDU eco Sensors Energy Management Software *
MSRP: Quote Upon Request

• 0U 42-Outlet thin form factor eco PDU
• Bank level metering

The ATEN NRGence™ PE5342TB eco PDU is thin form factor intelligent PDU that contain 42 IEC outlets. The lightweight thin form factor PDUs' 5.6 cm width fits tight into server racks, providing more space in the rack to increase air flow and cooling efficiency. This also means faster maintenance thanks to easier access to equipment installed behind PDUs.

NRGence™eco PDUs offers real-time power measurement–allowing you to monitor the power status of devices attached to the PDUs, at the PDU and Bank level, from practically any location via a TCP/IP connection.

With the combination of ATEN eco PDUs and eco Sensors, an administrator’s data center is equipped with real time monitoring, measurements and analysis that can produce reports of power usage, PUE, RCI and RTI to meet the ISO 50001 requirements. With these critical indexes, you can generate customized reports about your data center that include energy saving suggestions. Following these suggestions allows you to optimize energy usage to save energy without harming your IT equipment’s reliability. eco Sensors provides you with an easy method for managing multiple devices, offering an intuitive and user-friendly Graphical User Interface that allows you to configure a PDU device and monitor power status of the equipment connected to it.

Package Contents

  • 1x PE5342TB eco PDU
  • 1x Mounting Kit
  • 1x User Instructions
  • Thin form factor design with 56 mm width
  • Built-in 10/100 Mbps Ethernet port
  • Supports TCP/IP, UDP, HTTP, HTTPS, SSL, DHCP, SMTP, NTP, DNS, Auto Sense, Ping, Telnet, and SNMP V1,V2&V3
  • 2-level account and password security, IP/MAC filters, SSL 128-bit data encryption, RADIUS
  • Supports eco Sensors software and browser access via IE, Firefox, Chrome, Safari and more
  • Bank level power metering and monitoring
  • Environment monitoring via external sensors for rack temperature and humidity readings and alerts
  • Real-time aggregate current, voltage and power and power dissipation displayed in a browser-based UI
  • Space saving 0U rack mount design with rear mounting
  • Lok-U-Plug & EZ-Lok – easily secures power cable to PDU

    eco Sensors Energy Management Software *
  • Automatic discovery of all PE devices within the same intranet
  • Remote real-time power measurement and monitoring
  • Real-time environment sensor monitoring
  • Plotting/monitoring of all PE devices
  • Exceed threshold alert through SMTP and System log
  • Power analysis report
    * eco Sensors is designed to work with NRGence™ eco PDUs, and is bundled with all PE series packages.
Nominal Input Voltage100 – 240 VAC
Maximum Input Current30A(Max)
Input Frequency50-60 Hz
Input ConnectionNEMA L6-30P
Input Power6240 VA(Max)
Outlet TypeTotal: 36 x IEC320 C13 + 6 x IEC320 C19
Bank1: Outlet 1 – 21; 18 x C13 + 3 x C19
Bank2: Outlet 22 – 42; 18 x C13 + 3 x C19
Nominal Output Voltage100 – 240 VAC
Maximum Output Current (Outlet)C13: 15A(Max)
C19: 15A(Max)
Maximum Output Current (Bank)15A(Max)
Maximum Output Current (Total)30A(Max)
Breakers2 x 16A Slim Breaker
MeteringBank Level Current, Voltage, VA , PF and kWh Monitoring
Outlet SwitchingNone
Environment Sensor Ports2
Metering AccuracyVoltage Range: 100VAC ~ 250VAC +/-1%
Power Range: 100W ~ Maximum Capacity +/- 2%
Current Range: 0.1A~1A +/- 0.1A, 1A~20A +/-1%
Physical Properties
Dimensions (L x W x H)177.50 x 5.60 x 4.80 cm
(69.88 x 2.2 x 1.89 in.)
Weight6.01 kg ( 13.24 lb )
Power Cord Length3 m
Temperature (Operating / Storage)0–50°C / -20–60°C
Humidity (Operating & Storage)0–80% RH, Non-Condensing
EMC VerificationFCC, J55022, Others by Request
Safety VerificationPSE, Others by Request
NoteFor some of rack mount products, please note that the standard physical dimensions of WxDxH are expressed using a LxWxH format.

DescriptionVer.Release DateFile Name
Firmware Upgradev1.2.1152020-04-10 pet_5_6_v1.2.115.zip
Firmware Upgradev1.2.1122018-04-10 pet_5_6_v1.2.112.zip
Firmware Upgradev1.2.1112017-07-11 pet_5_6_v1.2.111.zip
Firmware Upgradev1.1.1092016-12-14 pet_5_6_v1.1.109.zip
Firmware Upgradev1.1.1042016-09-06 pet_5_6_v1.1.104.zip
Firmware Upgradev1.0.0722015-12-03 PET_5_6_v1.0.072.zip
ОSDescriptionVer.Release DateFile Name
MIB Filev1.1.1152015-05-05 PE_MIB_File_v1.1.115.zip
We are here to help! Please visit ATEN eService for technical assistance.