Waar te koop | Partner portaal | eShop

USB VGA Over IP KVM Extender (1920 x 1080@Unlimited Distance)

Niet meer leverbaar
CE790
  • Remotely access computers on your KVM installation via intranet
  • Dual console operation - control your system from both the transmitter and receiver USB consoles
  • High resolution video - up to 1920 x 1080
  • Audio enabled
ROHS
Weee
MSRP: Quote Upon Request

The CE790 is a IP based KVM Extender with automatic cable detection (Auto-MDIX) and RS-232 serial functionality that allows access to a computer system from a remote USB console (USB keyboard, monitor, and USB mouse) anywhere on the intranet.

The CE790 improves on previous designs by: 1) the addition of an intuitive On Screen Display (OSD) on both the transmitter and receiver units for easy setup and operation; 2) working over a standard TCP/IP LAN via inexpensive Cat 5e cable, allowing point-to-point, point-to-multipoint, and multipoint-to-multipoint administration without the need for an additional KVM switch; and 3) the addition of an RS-232 port, on both the transmitter and receiver Units - to connect to a serial terminal for configuration, and serial devices such as touchscreens and barcode scanners.
* The CE790 can be installed in point to point, point to multipoint and multipoint to multipoint configurations. Multipoint configurations require a separate purchase - contact your delear for details.

* In multipoint configurations, the IGMP (Internet Group Management Protocol) function of your network switches/hubs should be enabled to avoid deterioration of data throughput. If you do not know how to enable IGMP, please contact your network administrator.

Inhoud verpakking

  • 1x CE790T Digital KVM Extender (Transmitter)
  • 1x CE790R Digital KVM Extender (Receiver)
  • 1x Custom KVM Cable (VGA, USB, Audio; 1.8m/6ft)
  • 2x Power Adapters
  • 1x Mounting Kit
  • 1x User Instructions
  • Remotely access computers on your KVM installation via intranet
  • Dual console operation - control your system from both the transmitter and receiver USB consoles
  • OSD (On Screen Display) on both the transmitter and receiver units
  • Supports GUI operation*
  • No software required - an HTTP server is embedded in both units
  • Built-in ASIC for greater reliability and compatibility
  • USB Keyboard and USB Mouse Ports
  • RS-232 serial ports** - allows you to connect to a serial terminal for configuration, or serial devices such as touchscreens and barcode scanners
  • Audio enabled
  • USB overcurrent detection and prevention
  • High resolution video - up to 1920 x 1080
  • Supports widescreen formats
  • Ultra-High quality video mode
  • Hot pluggable
  • Rack mountable
  • Firmware upgradable
  • Auto-MDIX - automatically detects cable type

    Note:
    * The CE790 AP and GUI operation instructions can be downloaded from the ATEN website (www.aten.com).
    ** RS-232 serial ports support Tx/Rx signals only.




Beschr.Ver.UitgavedatumBestandsnaam
Firmware Upgradev2.2.2182015-05-13 ce790_v2.2.218.zip
Firmware Upgradev2.2.2142014-06-12 ce790_v2.2.214.zip
Firmware Upgradev2.1.2072011-03-23 ce790_v2.1.207.zip
Firmware Upgradev2.1.2042011-01-18 ce790_v2.1.204.zip
Firmware Upgradev1.1.1052010-02-24 ce790_v1.1.105.zip
OSBeschr.Ver.UitgavedatumBestandsnaam
Overige
GUI Softwarev2.1.2042011-01-18 ce790_GUI_v2.1.204.zip
Wij zijn hier om u te helpen. Contacteer ATEN’s eService voor technische ondersteuning