Where to buy | Partner Portal | eShop

8-Channel Digital I/O Expansion Box


VK258
MSRP: Quote Upon Request
  • An Ethernet-to-digital I/O box ships with 8 channels of digital input / output
  • Supports Power over Ethernet (PoE) or DC power supply
  • Supports Telnet CLI (command-line interface) mode for third-party system integration
  • An expansion solution for connecting more digital I/O devices to ATEN Control System

The VK258 provides Ethernet-to-digital I/O connectivity with 8 channels of digital input/output. It allows users to remotely access digital input / output devices from a PC or any system located anywhere. The complete Telnet CLI commands are fully integrated into users’ commercial and industrial applications.

What’s more, the VK258 serves as a flexible expansion box of the ATEN Control System, enabling users to control more digital I/O devices, such as various sensors, dry contact devices, PCs, and motor-driven devices in environments where more devices need to be centrally controlled. With the advantage of Ethernet-based connection, the expansion box can be easily connected to controllers via LAN connection from a variety of locations across a network.

Accessories:
*The power adapter for this product is sold separately. For more information about this accessory, see Accessories.

Package Contents

  • 1x VK258 8-Channel Digital I/O Expansion Box
  • 1x Rack Mount Kit
  • 9xTerminal Blocks
  • 1x User Instructions
  • An Ethernet-to-digital I/O box ships with 8 channels of digital input / output
  • Supports Power over Ethernet (PoE) or DC power supply
  • WebUI provides VK258 system information, including firmware upgrade
  • Supports Telnet CLI (command-line interface) mode for third-party system integration
  • An expansion solution for connecting more digital I/O devices to ATEN Control System
  • Flexible deployment via Ethernet connection
  • Works with a connected ATEN controller with ID Switch through instant configuration
Interfaces
I/O• 8 x Programmable Digital Input / Output Channel
(8 x 2-Pole Terminal Block Connector)
Digital Input:
– VDC Mode
Input Voltage Range: 0 to 24 VDC
Programmable Range: 1 to 24 VDC
– Dry Contact Mode
Pull-up 2k ohms to +12 VDC
Digital Output:
300 mA sink from 24 VDC
Ethernet• 1 x RJ-45 Female, 10/100Base-T
• Supported Protocol: ARP, ICMP, TCP/IP, DHCP, HTTPS, SSH
• DHCP-enabled. The following default IP settings will be used if no IP is assigned within 30 seconds:
IP: 192.168.0.60
Subnet Mask: 255.255.255.0
Switches
Controller ID1 x 16-segment Switch
Expander ID1 x 8-segment Switch
Reset Button1 x Semi-recessed Pushbutton
USB1 x USB Type A (Firmware upgrade only)
Power ConsumptionDC5V:2.2W:36BTU
POE:2.75W:39BTU
Power
Output12 VDC, 300 mA
Environmental
Operating Temperature0 – 50°C
Storage Temperature–20 – 60°C
Humidity0 - 80% RH, Non-Condensing
Physical Properties
HousingMetal
Weight0.46 kg ( 1.01 lb )
Dimensions (L x W x H)13.00 x 7.58 x 4.20 cm
(5.12 x 2.98 x 1.65 in.)
NoteFor some of rack mount products, please note that the standard physical dimensions of WxDxH are expressed using a LxWxH format.





DescriptionVer.Release DateFile Name
Firmware Upgradev3.4.3342023-03-28 vk258_v3.4.334.001.zip
Firmware Upgradev3.4.3332022-12-27 vk258_v3.4.333.001.zip
Firmware Upgradev3.1.3022021-12-02 vk258_v3.1.302.002.zip
Firmware Upgradev3.0.2942021-05-25 vk258_v3.0.294.002.zip
Firmware Upgradev2.8.2712020-11-12 vk258_v2.8.271.001.zip
Firmware Upgradev2.6.2532020-03-02 vk258_v2.6.253.003.zip
ОSDescriptionVer.Release DateFile Name
Firmware Upgrade Tool
Firmware upgrade toolv1.2.1132021-12-21 FirmwareUpgradeTool_Setup_v1.2.113.zip
Firmware upgrade toolv1.1.1062018-01-09 FirmwareUpgradeTool_Setup_v1.1.106.zip
IP Installer & Utility
IP Installerv1.4.1322014-09-23 IPInstaller_v1.4.132.zip
Modules
AMX Modulev1.02023-03-14 AMX-Module-for-ATEN-Control-System-v1.0.zip
Crestron Modulev1.02023-03-14 Crestron-Module-for-ATEN-Control-System-v1.0.zip
We are here to help! Please visit ATEN eService for technical assistance.