4-Port USB 3.0 4K DisplayPort Dual Display KVMP™ Switch
CS1944DP
- Superior video quality – 4096 x 2160 @ 60Hz and 3840 x 2160 @ 60Hz; 2-Port USB 3.1 Gen 1 hub with SuperSpeed 5 Gbps data transfer rates
- Quad-Display – Easily connect two CS1944DP units for a second dual-screen setup controlled through a single connection
- Multi-Stream Transport (MST) allows multiple monitors through a single DisplayPort connector2
- DisplayPort
Dual-Mode technology (DP++) supports HDMI and DVI signals via a DisplayPort-to-HDMI/DVI DP++ adapter1
The ATEN CS1944DP desktop KVM switch helps organize your desktop. Especially when managing a multimedia workstation at a large organization, CS1944DP provides you with instant access to two or four computers, all through a single USB keyboard, USB mouse
Advanced video support provides a better-defined DisplayPort connection with video resolutions up to 4K (4096 x 2160 / 3840 x 2160 @ 60 Hz). Incorporating dual display capability, you are allowed to enjoy a wider screen and easily switch between two or four DisplayPort systems. In addition, featuring a built-in USB 3.1 Gen 1 hub, the CS1944DP delivers unprecedented data transfer rates up to 5 Gbps, allowing you to maximize multimedia operations.
Engineered to meet the ever-increasing demand for dual display, ultra-fast data transmission rates, and lossless 4K video resolution, the CS1944DP is specifically designed for where multitasking is needed such as design, financial trading, and video post production.
Note:
As is common with DisplayPort KVM switches, switching between KVM ports in an Extended Desktop setup may cause windows open on the extended desktop to be resized/repositioned back to a default configuration on the main display. This is due to the nature of the DisplayPort protocol and may require a manual readjustment.
Package Contents
- 1x 4-Port USB 3.0 4K DisplayPort Dual Display KVMP™ Switch
- 8x DisplayPort 1.2 Cables
- 4x USB 3.0 Cables
- 8x Audio Cables
- 1x Power Adapter
- 1x User Instructions
- One USB keyboard and mouse controls four DisplayPort computers and share two USB peripherals
- Supports Quad Display by connecting two Dual Display KVM switches
- Supports superior video quality – Up to 4K (4096 x 2160 / 3840 x 2160 @ 60 Hz)
- Computer Selection via
front panel, hotkeys, mouse, and RS-232 commands - 2- Port USB 3.1 Gen 1 hub with SuperSpeed 5 Gbps data transfer rates
- Supports DisplayPort Dual-Mode technology (DP++)1
- Supports MST (Multi-Stream Transport)2
- Supports Console keyboard
emulation / bypass feature - Supports Console mouse
emulation / bypass feature - Independent switching of KVM, USB, and Audio
- Multilingual keyboard mapping – supports English, French, Japanese, and German keyboards
- DisplayPort 1.2 compliant; HDCP compliant3
- Supports HD audio4
- Power on detection
- Firmware upgradable
Note:
1. DisplayPort Dual–Mode technology (DP++) does not require an active adapter for most single display setups. Active DisplayPort adapters are recommended if you are unsure of the video source's DP++ compatibility.
2. MST (Multi-Stream Transport) requires either monitors that are capable of DisplayPort 1.2daisy-chaining, or use of a powered DisplayPort MST Hub. A DisplayPort v1.1a display can be the last display in a DisplayPort v1.2 chain. The PC source must be DisplayPort 1.2 compliant
3. For DisplayPort 1.4 compliant display device, make sure to configure the device setting to be compatible with DisplayPort 1.2 to avoid compatibility issue
4. HD audio through DisplayPort cannot be switched independently
Computer Connections | 4 |
Port Selection | Hotkey, Pushbutton, Mouse, RS-232 Commands |
Connectors | |
Console Ports | 2 x USB Type A Female 2 x DisplayPort Female (Black) 2 x 3.5mm Audio Jack Female (Green; 1 x front, 1 x rear) 2 x 3.5mm Audio Jack Female (Pink; 1 x front, 1 x rear) |
KVM (Computer) Ports | 4 x USB3.1 Gen1 Type B Female (Blue) 8 x DisplayPort Female (Black) 4 x 3.5mm Audio Jack Female (Green) 4 x 3.5mm Audio Jack Female (Pink) |
Daisy Chain Ports | 1 x RJ-45 Female |
Power | 1 x DC Jack |
USB Hub | 2 x USB3.1 Gen1 Type A Female (Blue; 1 x front; 1 x rear) |
LEDs | |
KVM | 5 (Orange) |
Audio | 5 (Green) |
USB Link | 5 (Green) |
Switches | |
Selected | 5 x Pushbutton |
Station Selection | 1 x Slide Switch |
Emulation | |
Keyboard / Mouse | USB |
Video | Up to 4096 x 2160 @ 60Hz, 2560 x 1440 @ 144Hz |
Scan Interval | 1-99 seconds (default: 5 seconds) |
Power Consumption | DC12V:6.125W:85BTU/h Note: ● The measurement in Watts indicates the typical power consumption of the device with no external loading. ● The measurement in BTU/h indicates the power consumption of the device when it is fully loaded. |
Environmental | |
Operating Temperature | 0–50°C |
Storage Temperature | -20–60°C |
Humidity | 0-80% RH, Non-condensing |
Physical Properties | |
Housing | Metal |
Weight | 1.51 kg ( 3.33 lb ) |
Dimensions (L x W x H) | 33.50 x 15.66 x 4.40 cm (13.19 x 6.17 x 1.73 in.) |
Note | For some of rack mount products, please note that the standard physical dimensions of WxDxH are expressed using a LxWxH format. |
User Manual
File Name | Release Date |
cs1942dp-cs1944dp-user-manual-w.pdf (1.43 MB) | 2024-01-08 |
cs1942dp-cs1944dp-rs232-user-manual-w.pdf (552.46 KB) | 2023-11-28 |
Quick Start Guides
cs1942dp_1944dp_kvm_switch_qsg.pdf (1.92 MB)CAD Drawing
CS1944DP-ASM-V01_WEB-20171013.pdf (50.94 KB)Firmware
Description | Ver. | Release Date | File Name |
Firmware Upgrade | v1.1.105 | 2023-10-20 | cs1942dp-1944dp-v1.1.105.zip |
Firmware Upgrade | v1.1.104 | 2023-03-01 | cs1942dp_1944dp_v1.1.104.zip |
Firmware Upgrade | v1.1.101 | 2019-05-27 | cs1942dp_1944dp_v1.1.101.zip |
Firmware Upgrade | v1.0.064 | 2018-07-12 | cs1942dp_1944dp_v1.0.064.zip |