Where to buy | Partner Portal | eShop

ATEN Control System - 8-button Keypad (US, 1 Gang)


VK108US
MSRP: Quote Upon Request
ROHS
Weee

The VK108US is a fully-customizable 8-button keypad designed for use with the ATEN Control System. The keypad provides an interface to control devices in a room from a standard wall mounted faceplate. Created with flexibility in mind, the one-gang keypad can be laid out in 14 different combinations of 4 to 8 buttons that snap together as easy as Lego’s. By connecting to the VK2100/VK1100 Control Box over a LAN, users will find it’s effortless using VK6000 software to configure the desired control of any connected device from the keypad. With the button’s ready to go, you have instant and smart control of the facilities from a keypad or keypads that can manage any device in the room. The VK108US is an affordable solution, perfect to serve as the primary interface in small meeting rooms, or as secondary device control in classrooms and conference centers.

Note: This model is also available in black color – Part number: VK108US1, which is a built-to-order product. To place an order, please contact your regional ATEN representative.

Keypad Layout Example



Custom button placement on the keypad can be set in 14 different combinations of 4 to 8 buttons. The example above shows the 10 most commonly used.


Package Contents

  • 1x VK108US Keypad
  • 1x Button Pack
  • 1x Terminal Block
  • 1x Faceplate
  • 1x User Instructions
  • Key pad - provides physical connection to the ATEN Control System
  • Fully customizable with 14 layout combinations of 4 to 8 buttons
  • Available in black or white color
  • System LED indicators for quick connection status check
  • Dual-color button LEDs for clear indication and visibility in dark environments
  • Easy ID pairing with Control Box for Ethernet communication
  • Up to 8 keypads connect to a single Control Box for future scalability
  • Unrestricted modes support flexible behavior settings for each button
  • Intuitive web GUI for easy keypad configuration
  • Dual power supply – DC 5V or Power over Ethernet
  • Customized button engraving service
Interfaces
Ethernet• 1 x RJ-45 Female, 10/100Base-T
• Supported Protocol: ARP, ICMP, TCP/IP, DHCP, HTTPS
• DHCP-enabled. The following default IP settings will be used if no IP is assigned within 30 seconds:
IP: 192.168.0.60
Subnet Mask: 255.255.255.0
Keypad Layout4~8 buttons customizable in 14 keypad layouts
Switches
Controller ID1 x 16-segment Switch
Keypad ID1 x 8-segment Switch
Reset Button1 x Semi-recessed Pushbutton
Power ConsumptionDC5V:1.25W:6BTU
DC48V:1.58W:7BTU
Environmental
Operating Temperature0 – 50°C
Storage Temperature–20 – 60°C
Humidity0 - 80% RH, Non-Condensing
Physical Properties
HousingPlastic
Weight0.13 kg ( 0.29 lb )
Dimensions (L x W x H)11.63 x 7.06 x 3.89 cm
(4.58 x 2.78 x 1.53 in.)
Faceplate Dimensions (L x W x H)11.92 x 7.42 x 0.92 cm
(4.69 x 2.92 x 0.36 in.)
NoteFor some of rack mount products, please note that the standard physical dimensions of WxDxH are expressed using a LxWxH format.




DescriptionVer.Release DateFile Name
Firmware Upgradev2.7.2642020-05-22 vk108us_v2.7.264.001.zip
Firmware Upgradev2.7.2632020-03-27 vk108us_v2.7.263.zip
Firmware Upgradev1.0.0732019-11-01 vk108us_v1.0.073.zip
Firmware Upgradev1.0.0712018-05-03 vk108us_v1.0.071.zip
Firmware Upgradev1.0.0702018-01-15 vk108us_v1.0.070.zip
Firmware Upgradev1.0.0662017-11-08 vk108us_v1.0.066.zip
ОSDescriptionVer.Release DateFile Name
ATEN Certified Drivers
Drivers for ATEN Control System
Search for drivers
Firmware Upgrade Tool
Firmware upgrade toolv1.2.1132020-06-16 FirmwareUpgradeTool_Setup_V12.113.003.zip
Firmware upgrade toolv1.1.1062018-01-09 FirmwareUpgradeTool_Setup_V1.1.106.zip
We are here to help! Please visit ATEN eService for technical assistance.