Where to buy | Partner Portal | eShop

ATEN Control System - 12-button Keypad (EU, 2 Gang)

MSRP: Quote Upon Request

The VK112EU is a fully-customizable 12-button keypad designed for use with the ATEN Control System. The keypad provides an interface to control devices in a room from a standard wall mounted faceplate. Created with flexibility in mind, the 2-gang keypad can be laid out in 125 different combinations of 6 to 12 buttons that snap together as easy as Lego’s. By connecting to the VK2200 / VK1200 / VK2100A / VK1100A Control Box or VK0100 / VK0200 Control Pad over a LAN, users will find it’s effortless using VK6000 software to configure the desired control of any connected device from the keypad. With the buttons ready to go, users have instant and smart control of the facilities from a keypad or keypads that can manage any device in the room. The VK112EU is an affordable solution, perfect to serve as the primary interface in meeting rooms, or as secondary device control in classrooms and conference centers.

Note: This model is also available in black color – Part number: VK112EU1, which is a built-to-order product. To place an order, please contact your regional ATEN representative.

Keypad Layout Example

Custom button placement on the keypad can be set in 125 different combinations of 6 to 12 buttons. The example above shows the 12 most commonly used.

Flexible mounting on the flat surface or to the wall via VK102 or VK112EUTTK
ATEN has released VK102, an ergonomically designed, EU-type, 2-Gang tabletop kit compatible with the VK112EU, to further enhance the ease-of-use. VK102 can be sold separately or bundled with VK112EU as VK112EUTTK.

*The power adapter for this product is sold separately. For more information about this accessory, see Accessories.

Package Contents

  • 1x VK112EU 12-Button Keypad (EU, 2 Gang)
  • 1x Button Pack
  • 1x Terminal Block
  • 1x Faceplate
  • 1x User Instructions
  • Keypad - provides physical connection to the ATEN Control System
  • Fully customizable with 125 layout combinations of 6 to 12 buttons
  • Available in black or white color
  • System LED indicators for quick connection status check
  • Dual-color button LEDs for clear indication and visibility in dark environments
  • Easy ID pairing with Control Box for Ethernet communication
  • Up to 8 keypads connect to a single Control Box for future scalability
  • Versatile modes support flexible behavior settings for each button
  • Intuitive web GUI for easy keypad configuration
  • Dual power supplies with Power over Ethernet (PoE) and DC power
  • Customized button engraving service
  • Flexible installation is made easier with the keypad tabletop kit (VK112EUTTK), allowing for device mounting on the table or to the wall
Ethernet• 1 x RJ-45 Female, 10/100Base-T
• Supported Protocol: ARP, ICMP, TCP/IP, DHCP, HTTPS
• DHCP-enabled. The following default IP settings will be used if no IP is assigned within 30 seconds:
Subnet Mask:
Keypad Layout6~12 buttons customizable in 125 keypad layouts
Controller ID1 x 16-segment Switch
Keypad ID1 x 8-segment Switch
Reset Button1 x Semi-recessed Pushbutton
Power ConsumptionDC5V:1.25W:6BTU/h

● The measurement in Watts indicates the typical power consumption of the device with no external loading.
● The measurement in BTU/h indicates the power consumption of the device when it is fully loaded.
Operating Temperature0 – 50°C
Storage Temperature–20 – 60°C
Humidity0 - 80% RH, Non-Condensing
Physical Properties
Weight0.17 kg ( 0.37 lb )
Dimensions (L x W x H)8.32 x 14.76 x 4.80 cm
(3.28 x 5.81 x 1.89 in.)
Faceplate Dimensions (L x W x H)8.62 x 15.12 x 0.92 cm
(3.39 x 5.95 x 0.36 in.)
NoteFor some of rack mount products, please note that the standard physical dimensions of WxDxH are expressed using a LxWxH format.

DescriptionVer.Release DateFile Name
Firmware Upgradev3.6.3552023-10-26 vk112eu-v3.6.355.zip
Firmware Upgradev3.1.3022021-11-01 vk112eu_v3.1.302.001.zip
Firmware Upgradev3.0.2942021-05-25 vk112eu_v3.0.294.001.zip
Firmware Upgradev2.7.2642020-05-22 vk112eu_v2.7.264.001.zip
Firmware Upgradev2.7.2632020-03-27 vk112eu_v2.7.263.zip
Firmware Upgradev1.0.0682019-11-01 vk112eu_v1.0.068.zip
Firmware Upgradev1.0.0662018-05-03 vk112eu_v1.0.066.zip
Firmware Upgradev1.0.0652018-02-09 vk112Eu_v1.0.065.zip
ОSDescriptionVer.Release DateFile Name
ATEN Certified Drivers
Drivers for ATEN Control System
Search for drivers
Firmware Upgrade Tool
Firmware upgrade toolv1.2.1132021-12-21 FirmwareUpgradeTool_Setup_v1.2.113.zip
Firmware upgrade toolv1.1.1062018-01-09 FirmwareUpgradeTool_Setup_v1.1.106.zip
IP Installer & Utility
IP Installerv1.4.1322014-09-23 IPInstaller_v1.4.132.zip
We are here to help! Please visit ATEN eService for technical assistance.