製品の購入方法 | オンラインストア | パートナーポータル | eShop

Release Note

Welcome to KN4140v/KN4124v/KN2140v/KN2124v KVM over IP Switch
Notice: Before downloading the software , be sure to read the following information carefully.
This latest version is cumulative and includes the corrections contained in all previous revisions. There is no need to install previous version if you are installing this one.
Version History
VersionDescriptionNote
V1.5.145 & V1.7.1661. Support redundant CC2000 server list
2. Support KA7170/KA9170 cascading
3. Support KA7166, KA7168, and KA7169
4. Support new function of Update Adapter Display Information
1. For KN4140v/KN4132 series, you must upgrade to upgrade to relay version v1.5.145 first for firmware v.1.5.xxx and previous
2. To support redundant CC2000 server list, you must use CC2000 Software v2.3.222 or higher
V1.7.1611. Support Video Session Recorder
2. Support Snapshot for browser
 
V1.6.1591. Added support for CAC Reader (KA7177)
2. Improved video quality and mouse performance
3. Added support for auto balance tolerance
4. Improved user interface for video setting
5. Added PON operation on the control panel
6. Added support for FW & FPGA build data on Device Information page
7. Improved communication method with CC2000, when CC2000 is running with JRE 1.6_27 or later
1. For KN4140v/KN4132 series, you must upgrade to upgrade to relay version v1.5.145 first for firmware v.1.5.xxx and previous
2. To work with CC2000 V2, you must use CC2000 Software v2.2.212 or higher with this release
V1.6.1581.Enhanced Array mode response time
2.Improved video compatibility at local console
3.Improved compatibility with blade server
4.Improved compatibility with network equipment
5.To support switching blade directly for HP C3000/C7000
1.To work with CC2000 V2, you must use CC2000 Software v2.0.193 or higher with this release
2.If upgrading from KN4140v/KN4124v/KN2140v/KN2124v v1.1.108 or earlier: Upgrade to KN4140v/KN4124v/KN2140v/KN2124v relay version v1.5.145 first.
3.CC2000 v2.0.193 supports KN4140v/KN4124v/KN2140v/KN2124v v1.6.152 and later only.
4.To support blade servers, KN4140v/KN4124v/KN2140v/KN2124v must extend firmware functions with Blade Server Module
V1.6.1561. Fixed bug of Japanese keyboard mapping issue
2. Supported local console restore default private certificate.
3. Improved CC2000 adapter ID management
4. Improved PN0108 management under CC2000
5.Improved viewer scaling function
1. To work with CC2000 V2, you must use CC2000 Software v2.0.193 or higher with this release.
2 .If upgrading from KN4140v/KN4124v/KN2140v/KN2124v v1.1.108 or earlier: Upgrade to KN4140v/KN4124v/KN2140v/KN2124v relay version v1.5.145 first.
3. CC2000 v2.0.193 supports KN4140v/KN4124v/KN2140v/KN2124v v1.6.152 and later only.
V1.6.152 & V1.5.145KN4140v/KN4124v/KN2140v/KN2124v firmware V1.6.152 is changed architecturally to enhance/support more features such as following:
1. Blade server support
2. IPv6 support
3. ICMP support
4. Local panel array mode support
5. Power association in GUI support
6. CSR support
7. Serial console third party tool support, such as Putty
8. Keyboard/Mouse Broadcast support
1. To work with CC2000 V2, you must use CC2000 Software v2.0.193 or higher with this release.
2. If upgrading from KN4140v/KN4124v/KN2140v/KN2124v v1.1.108 or earlier: Upgrade to KN4140v/KN4124v/KN2140v/KN2124v relay version v1.5.145 first.
3. CC2000 v2.0.193 supports KN4140v/KN4124v/KN2140v/KN2124v v1.6.152 and later only.
V1.1.108

1.Added CC2000 support.
2.Added new version F/W KA7175/KA7176 V1.0.074.
3.Improved performance for OOBC.
4.Added remote client to support USB full/high speed selection for VM operation. 5.Added Windows client support for DVD ISO files.

You must use CC2000 Software v1.0.094 or higher with this release.
V1.1.106Initial release.