HDMI HDBaseT Receiver with Dual Output (4K@100m) (HDBaseT Class A)

VE814AR

HDMI HDBaseT Receiver with Dual Output (4K@100m) (HDBaseT Class A)-2

HDMI HDBaseT Receiver with Dual Output (4K@100m) (HDBaseT Class A)-3

HDMI HDBaseT Receiver with Dual Output (4K@100m) (HDBaseT Class A)-4

MSRP: Quote Upon Request

Aan offertewagentje toevoegen

Extends HDMI signals to one local and two remote displays up to 100 m over a single Cat 5e/6/6a or ATEN 2L-2910 Cat 6 cable
HDMI (3D, Deep Color, 4K); HDCP 2.2 compatible
Superior video quality:
• 4K up to 100 m
• 1080p up to 150 m when in HDBaseT Long Reach Mode
Supports two IR channels for simultaneous IR signal transmissions, ranged from 30 KHz to 56 KHz

ATEN VE814AR is an HDBaseT Video Receiver that is capable of receiving HDMI signals up to 100 m over a single Cat 5e/6/6a or ATEN 2L-2910 Cat 6 cable.This HDCP 2.2-compliant receiver meets the HDMI Specification, including 3D, Deep Color, the maximum data rate of (10.2 Gbps), and 4K video quality up to 100 m.

The VE814AR supports RS-232 and IR signaling pass-through, allowing you to control the HDMI source device from the remote unit (VE814AR) while granting access to the HDMI display device from the local unit (VE8014AT). In addition, it supports Long Reach Mode that extends HDMI signals up to 150 m, 1080p, via a single Cat 5e/6 cable.

The VE814AR is a powerful solution for where digital signage is required, such as bars, educational spaces, and public transportation stations, allowing display of identical contents at different spots.

Inhoud verpakking

1x VE814AR Receiver
1x RS-232 Terminal Block
1x Power Adapter
1x User Instructions

Extends HDMI signals to one local and two remote displays up to 100 m over a single Cat 5e/6/6a or ATEN 2L-2910 Cat 6 cable
HDMI (3D, Deep Color, 4K); HDCP 2.2 compatible
Superior video quality:
• 4K up to 100 m
• 1080p up to 150 m when in HDBaseT Long Reach Mode
Extends Ethernet communication using the Ethernet pass-through port
Supports two IR channels for simultaneous IR signal transmissions, ranged from 30 KHz to 56 KHz
ATEN EDID Technology -- when both transmitter and receiver sides are connected, VE814A adopts the EDID values of the display connected to the VE814AT for high-quality output
RS-232 channel – allows you to connect to serial terminals or serial devices, such as touch screens and barcode scanners
Supports wide screen format
Built-in 8 kV/15 kV ESD protection
Plug-and-play
Rack-mountable

Video Uitgang
Interface’s	2 x HDMI Type A-tegenstekker (zwart)
Verhindering	100 Ω
Maximale Afstand	3 m (2L-7D03H)
Video
Maximale Datatarief	10,2 Gbps (3,4 Gbps per laan)
Maximale Pixel Klok	340 MHz
Nakoming	HDMI (3D, Deep Color, 4K) Compatibel met HDCP2.2 Consumer Electronics Control (CEC)
Maximale Resoluties / Afstanden	Maximaal 4K op 70 m (Cat 5e/6) / 100 m (Cat 6a/ATEN 2L-2910 Cat6); 1080p op 100 m (Cat 5e/6/6a) *4K-ondersteuning: 4096 x 2160 / 3840 x 2160 op 60 Hz (4:2:0); 4096 x 2160 / 3840 x 2160 op 30 Hz (4:4:4)
Geluid
Uitgang	2 x HDMI Type A-tegenstekker (zwart)
Connectoren
Eenheid tot Eenheid	1 x RJ-45 tegenstekker
Stroom	1 x gelijkstroomjack (zwart) met vergrendeling
Controle
RS-232	Verbinding: 1 x terminalblok, 3-polig Baudrate: 19200, Databits: 8, Stopbits: 1, geen pariteits- en flowcontrole
IR	2 x mini-stereo-jack-tegenstekker (zwart)
Ethernet	1 x RJ-45 tegenstekker
Schakelaars
Lange Afstandsmodus Schakelaar	1 x schuifschakelaar - AAN/UIT
Firmware-upgrade	1 x schuifschakelaar - AAN/UIT
Stroomverbruik	5 V gelijkspanning, 7,87 W, 37 BTU
Omgeving
Operatietemperatuur	0 - 40 °C
Opslagtemperatuur	-20 - 60 °C
Vochtigheid	0 - 80% RLV, niet-condenserend
Fysieke Eigenschappen
Behuizing	Metaal
Gewicht	0,47 kg (1,04 lb)
Afmetingen (L x B x H) met steun	14,02 x 12,30 x 3,00 cm (5,52 x 4,84 x 1,18 in)
Afmetingen (L x B x H) zonder steun	13,60 x 10,10 x 2,90 cm (5,35 x 3,98 x 1,14 in)